Rain Bird Plastic Drip Irrigation Emitter Tubing 1/2 In. D X 50 Ft. L

Rain Bird’s copper-colored subsurface emitter tubing with copper shield provides 90% watering efficiency, right at the root zone. Rain Bird’s patent-pending copper shield technology protects the emitter from root intrusion, creating a long-lasting, low maintenance sub-surface drip irrigation system for use in organic gardens or shrub and groundcover areas. Having the copper color outside ensures the copper chip is inside and that your dripline is protected from root intrusion.

Required Filtration: 120 mesh

Copper color outside ensures that the copper shield is inside

The pressure-compensating emitter design provides a consistent flow over the entire lateral length ensuring higher uniformity for increased reliability in the pressure range of 8.5 to 60 psi

Dual-layered tubing (copper over black) provides unmatched resistance to chemicals, algae growth and UV damage

Rain Birds proprietary emitter design resists clogging by use of an extra-wide flow path combined with a self-flushing action

Plants are watered uniformly with pre-installed, pressure compensating emitters spaced every 18″

0.700 in. OD, 0.580 in. ID

Standard male and female hose thread ends, with removable end cap

Water Temperature: Up to 100°F (37,8° C)

Ambient Temperature: Up to 125°F (51,7° C)